[Asterisk-Users] All lines are busy

[Henry Devito]

Sounds like a possible disconnect issue,  When the lines are not available 
try doing a 'zap show channel X' with X being the channel number 1,2,or 3 
and see if asterisk thinks the line is onhook or offhook.  Just a thought.

Henry
----- Original Message ----- 
From: "Colin E. McDonald" <colin at swaveit.com>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, April 27, 2005 7:02 AM
Subject: [Asterisk-Users] All lines are busy


Hi all. I ma having a problem with pstn/tdm lines.

After the system has been in use for a while, it seems that I can only
use one line in the system. I have three PSTN attached to Digium
TDM04B/400P and they are grouped into g0. I tried using callprogress and
busydetect in the zapata.conf but then my SIP phones can't place calls
on hold anymore. (Thought that was pretty strange). Once I restart the
asterisk server and the zaptel service it works normally for a while and
then goes back. No matter what happens, one line is always available to
dial in or out on. Any suggestions would be most appreciated.

Thanks

CM
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users