[Asterisk-Users] can't make my PRI dial out

[tim panton]

On 22 Apr 2005, at 16:02, Mark Phillips wrote:

> Nope. This didn't work. I reordered the settings as described below 
> and then did "restart gracefully" at the CLI.
>
> No change.

The received wisdom is that you need to power cycle a box if you change 
zaptel.conf
it forces a cold start at _both_ ends of the PRI.
Otherwise the changes (like clocking) don't always take.


Restart gracefully is just to gentle for this :-)

Tim.

http://www.westhawk.co.uk/