[Asterisk-Users] can't make my PRI dial out

[Mark Phillips]

Nope. This didn't work. I reordered the settings as described below and 
then did "restart gracefully" at the CLI.

No change.

Robert Webb wrote:
> 
> On Fri, 22 Apr 2005 10:37:32 -0400
>  Mark Phillips <kc2eni at nyc-ares.org> wrote:
> 
>> I have a full PRI installed on my * machine. I can get inbound calls 
>> just fine but can't make outbound ones.
>>
>> Zaptel.conf says;
>>
>> span=1,1,0,esf,b8zs
>> bchan=1-23
>> dchan=24
>>
>>
>> zapata.conf says
>>
>> language=en
>> context=default
>> switchtype=4ess
>> pridialplan=unknown
>> signalling=pri_cpe
>> channel=>1-23
>> echocancel=yes
>> group=1
>>
> 
> Your zapata.conf should look like this:
> 
> language=en
> context=default
> switchtype=4ess
> pridialplan=unknown
> signalling=pri_cpe
> echocancel=yes
> group=1
> channel=>1-23
> 
> You need to move the echocancel and the group above the channel line. 
> The channel line definitions must be above and not below.
> 
> Robert
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>