[Asterisk-Users] Digium Hardware Problem

[Robert Bungener]

Hi List,

I running into the following problem, 
I have a FC2-linux running the april 4 CVS. 
In my dmesg fragment
====>>><<<====
Zapata Telephony Interface Registered on major 196
PCI: Found IRQ 11 for device 0000:00:11.0
Freshmaker version: 71
Freshmaker passed register test
Module 0: Installed -- AUTO FXS/DPO
Timeout waiting for calibration of module 1
Timeout waiting for calibration of module 1
Proslic Failed on Second Attempt to Auto Calibrate
Proslic Failed on Second Attempt to Calibrate Manually. (Try -DNO_CALIBRATION 
in Makefile)
Module 1: FAILED FXS (FCC)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
Registered tone zone 0 (United States / North America)
PCI: Found IRQ 9 for device 0000:00:04.5
PCI: Sharing IRQ 9 with 0000:00:0f.0
PCI: Setting latency timer of device 0000:00:04.5 to 64
Freed a Wildcard
Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
PCI: Found IRQ 11 for device 0000:00:11.0
Freshmaker version: 71
Freshmaker passed register test
Module 0: Installed -- AUTO FXS/DPO
Module 1: Installed -- AUTO FXS/DPO
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
Registered tone zone 0 (United States / North America)
application asterisk uses obsolete OSS audio interface
application ztmonitor uses obsolete OSS audio interface
====>><<====
I have dialtone on one of the two ports but not both ... 
The FXSes are working OK 

Any suggestions, or additional clues ??

-- 
A bartender is just a pharmacist with a limited inventory.
I used to have a handle on life, but it broke
---
Robert Bungener
Dutch World Ventures