[Asterisk-Users] Looking for ATAs

[jltaylor]

I believe the routing is only to either VOIP or the local pots line.
James

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Anton Krall
Sent: Tuesday, April 19, 2005 10:19 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Looking for ATAs


James.

With sipuras 3000 would I be able to deploy multiple atas on diff. locations
and be able to use the PSTN (FXO) between them? Also, for example, I was
thiking about this scenario:

Location 1:

1 FXO line only and 2 FXS, can I use a sipura 3000 (1 FXO and 1 FXS) and a
sipura 2000 (1 FXS no router) and allow both FXS to call each other thru the
routing on the sipura 3000 and share the FXO between both FXS and also
incoming sip calls from other locations to use the 3000 FXO?

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of jltaylor
Sent: Martes, 19 de Abril de 2005 09:59 a.m.
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Looking for ATAs

The SIPURA 3000 allows some dialplan programming.
You might check them out.
James

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Anton Krall
Sent: Monday, April 18, 2005 5:24 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Looking for ATAs


Im looking for ATAs that have 1 FXO and 2 FXS ports, they will connect to a
central Asterisk server and they idea is to share the FXO between the ATAs
for people in location 1 can call the persons extension in location 2 or use
locations 2's POTS lines to dial as a local call.

Any recommendations?

Also, how do you go about a dialplan for this? Does asterisk have to manage
routing for this?  Configure the ATAs so that if call not local or between
the 2 local FXS, then route thru asterisk for termination on some other ATA
(to their FXS or FXO)?

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users