[Asterisk-Users] Re: Asterisk PBX with X100P in India

Vikram Rangnekar vicky at freebsdcluster.net
Fri Apr 15 22:46:25 MST 2005


+++ Min Hwan Chang [15/04/05 11:25 -0700]:
> My Setup is below:
> X100P connected to POTS
> Siemens IP Phone
> Asterisk at Home v0.6
> 
> 
> When I try dialing out the POTS line in India using a Siemens IP
> phone, I'll hear the phone ring for a second, then hear loud beeps. 
> The loud beeps I believe are from the POTS line?
> 
> I am currently trying to dial a Cell phone number within India, so the
> general format is 09XXXXXXXXX.
> 
> I have my extensions.conf set up like so for Outbound Context:
> 
> ----------------------
> [outbound-local]
> exten => _XXXXXXXXX,1,Macro(dialout-default,09${EXTEN})
> 
> [outbound-ld]
> exten => _001NXXNXXXXXX,1,Macro(dialout-default,${EXTEN})
> 
> ---------------------
> For the life of me I can't' seem to figure out what the problem is.
> Thanks for the help!
> 
> Regards,
> Min 
> 
> 
> 
> >what kind of problems do u have?
> >can u explain more in detail so we can try helping you?
> >best regards
> 
> 
> >Hi ,
> >Whats the problem you are facing in configuring the x100P dial out?
> >Are you getting any errors.
> >Anil
> 
> On 4/15/05, Min Hwan Chang <minchang at gmail.com> wrote:
> > I'm currently trying to set up an Asterisk PBX system in India.
> > However I'm having trouble configuring the X100P to dial out on the
> > POTS line.  Does anyone have any knowledge about this?
> > 
> > I know the telephone system is a bit different in India, so would the
> > X100P not be suitable?  Is there a change I need to make in the
> > Zaptel.conf or zapata.conf?
> > 
> > Because I'm using Asterisk at Home 0.6, the extensions.conf is also
> > pretty frustrating...
> > 
> > Any help here would be appreciated.
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

I've used the X100P a lot here in India is works perfectly without any real
config changes for incomming and outgoing calls. Are you sure you are on a
real PSTN line I mean one from a Telco and not from an internal EPBX which
would need you to dial a prefix to get a outside line. And if you are on an
EPBX line and you already know what I mentioned aboove amybe your EPBX is
giving some non standard tones or something there are many cheap EPBX's in
India which really act wierd sometimes. 

-- 
regards
Vikram (http://www.vicramresearch.com)



More information about the asterisk-users mailing list