[Asterisk-Users] Re: TE110P - NT-Mode ?

[Tony Mountifield]

In article <20050412125546.GA1147 at jensen.local>,
Henry Jensen <hjensen at gmx.de> wrote:
> On Tue, Apr 12, 2005 at 12:23:52PM +0000, Tony Mountifield wrote:
> > In article <20050412101502.GA1131 at jensen.local>,
> > Henry Jensen <hjensen at gmx.de> wrote:
> > > 
> > > Is there any way I can switch the TE110P card to NT-Mode ?
> > 
> > In /etc/asterisk/zapata.conf, change signalling=pri_cpe
> > to signalling=pri_net
> 
> 
> Wait a minute, you are saying, that pri_net is setting the card to NT mode?
> 
> AFAIK NT mode must be set somewhere in the hardware configuration (e. g. when loading the 
> kernel module - see http://www.voip-info.org/wiki-Asterisk+zaphfc). 
> 
> Nevertheless, I tried this already, the HiPath still says that it receives 
> no signal and gives me a yellow alarm in zttool.

Sorry, I must have misunderstood. I thought you meant you wanted the card
to behave as a switch rather than as a CPE.

Perhaps instead, or as well, you need to use a crossover cable. That's
what I have to use in order to connect one card port to another for testing.

See http://www.voip-info.org/wiki-crossover+T1+cable

Cheers
Tony
-- 
Tony Mountifield
Work: tony at softins.co.uk - http://www.softins.co.uk
Play: tony at mountifield.org - http://tony.mountifield.org