[Asterisk-Users] Changing DTMF mode depending on codec chosen

[Andre Normandin]

No offense taken.  In fact, it sounds like you have 'spotted' an error or
potential error in the way I have configured this.  I would appreciate any
and all comments/suggestions you may have on how I could configure asterisk
to change dtmfmode depending on the codec being used.

Thanks,
      - Andre

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Luki
Sent: Monday, April 11, 2005 11:52 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Changing DTMF mode depending on codec
chosen


> It seems that sometimes broadvoice honors my g.729 request
Be careful with this. I tried setting G726-32 as a prefered codec and
SOME calls would accept it (depending on call destination) but usually
the caller did NOT hear me, although I could hear the caller just
fine.

So there's truth to it: BV officially only supports G711 so use it to
avoid surprises... and end up blaming Broadvoice :). Their service is
actually quite good and reliable, but unfortunately proper
configuration seems to challenge many Asterisk users -- this is a
general observation, nothing personal. No wonder Broadvoice doesn't
officially support Asterisk...

--Luki
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users