[Asterisk-Users] Asterisk Max TNT

[Michael Baird]

Hello, I've recently been testing egressing calls from asterisk via SIP
to a Max TNT (TAOS 10.1.1). I'm able to route the calls to it and
complete the calls successfully, however the called-party id gets lost
somewhere. In my log output on the TNT I see.

When the call is placed I see, the called-from and called-to number like
below.
[1/7/41/0] Assigned to port [MBID 915;
                                │ 5175556386->5175557167]

But when the VOIP Session comes up I see, leaving the called-from blank.
1/7/41/0] VOIP session up:
                                │ <V:436004f521319441375fc7ad37ac3>
[MBID 915;
                                │ ->5175557167]

I've checked through quite a few settings with no change. Egressing out
a ZAP channel from the same asterisk box over the same trunks does put
the called-from on the line.

I read something in the changelog, that the TNT drop callerid when it
egresses if the SIP INVITE messages are not enclosed in brackets, can
anyone confirm this? If so has someone tried 11.0.2 to see if it works
with asterisk properly.

Regards
-- 
Michael Baird <mike at tc3net.com>