[Asterisk-Users] at-320 phone configuration difficulty

clive at sentechsa.com clive at sentechsa.com
Mon Apr 4 00:41:09 MST 2005


Mishehu

try 19750407

Also to get palmtool to work you need to play with the debug 
settings on the phone first.

koltov
Clive






On 2 Apr 2005 at 0:30, I put the Who? in Mishehu wrote:

> Hi guys,
> 
> I just got a Netweb 401 (AT-320) phone.  It came with firmware 1.38 on 
> it, and it has since been updated after failed attempts to configure, 
> and now has 1.42 (IAX2) from centrality (P1688S).  According to 
> voip-info, atcom's docs, etc, there are two passwords for it - one is 
> 1234, and the superuser password is supposed to be 12345678.  Only 1234 
> works, and I get codec configuration, IP configuration, 
> firmware/ringtone/dialplan update options.  But nowhere do I find where 
> to set information about my asterisk box I want this phone to connect 
> to.  I've tried using Palmtool 1.42, and anytime I try to query the 
> phone's settings, I get "Cannot connect to Palm1".  The person who sold 
> me sent no documentation or discs with it, and now on top of it, all the 
> buttons such as Local Num and Local IP are all switched around.  I am 
> very unhappy, and have wasted 4 hours already trying to work on this.  
> If anybody can assist, I'll be very grateful.
> 
> -mishehu
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users





More information about the asterisk-users mailing list