[Asterisk-Users] Local Outbound Calls on PRI

[Steve Maroney]

Your extensions.conf and console output might help us out quite a bit.

Thank you,
Steve Maroney

On Fri, 24 Sep 2004, Paul Oster wrote:

> I'm in the process of turning up a PRI in one of my markets and have
> run into a problem I have never seen before.  I am unable to place a
> local outgoing call.  Long Distance over the same PRI works fine.
>
> When I attempt to place a local call using the PRI I see Asterisk
> attempt to dial, and am greeted with a busy signal.  This signal
> appears to originate on the telco's switch.
>
> I have had a central office tech from the CLEC insert a monitor in the
> distribution point on the switch and observe call flow.  According to
> the tech call flow appears proper, and he was able to tell me the
> number I was calling from and the number I attempted to dial.
>
> He then placed a PRI test-set at the distribution point in the switch
> and successfully made and terminated a variety of calls from that
> point.
>
> He then took the PRI test set out to my physical location and did the
> same test, made and received local and long distance calls on one of
> my trunks.
>
> After thinking about this last night I decided to re-update my
> Asterisk installation to the latest bleeding edge CVS version and
> re-test from my test extension with the exact same results.  I
> successfully make long distance calls, successfully receive any calls,
> but the local calls originated from the SIP phone (SNOM200 and
> Mediatrix2102) fail with a busy signal that seems to originate from
> the CLEC's switch.
>
> Any suggestions?
>
> Thanks in advance.
>
> Paul
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>