[Asterisk-Users] Local Outbound Calls on PRI

[Henry Devito]

What are you sending for the CSID?  Dialing LD goes through the CLEC and may
be excepting your call no matter what the CSID is.  The local switch may be
rejecting you because the CSID you are sending is not what they are
expecting.  I had a the same experience on a legacy phone system.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Paul Oster
Sent: Friday, September 24, 2004 11:14 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Local Outbound Calls on PRI

Just tried it with 7,10, and 11 digit dialing, and got the expected
error from the switch, "the number you have dialed is not a long
distance number, there is no need to dial the digit one before the
number..."

Good suggestion, but that doesn't appear to be the problem.

On Fri, 24 Sep 2004 11:25:12 -0400, Scott Lykens <slykens at gmail.com> wrote:
> On Fri, 24 Sep 2004 10:06:06 -0500, Paul Oster <paulmoster at gmail.com>
wrote:
> 
> > I'm in the process of turning up a PRI in one of my markets and have
> > run into a problem I have never seen before.  I am unable to place a
> > local outgoing call.  Long Distance over the same PRI works fine.
> >
> > When I attempt to place a local call using the PRI I see Asterisk
> > attempt to dial, and am greeted with a busy signal.  This signal
> > appears to originate on the telco's switch.
> 
> Any chance you're sending more or fewer digits than the CLEC expects
> to see from you?
> 
> I would expect that the tech would have picked up on it when he was
> watching your call attempts but just in case...
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users