[Asterisk-Users] MFC/R2

[Steve Underwood]

Hi all,

I have begun the release of my MFC/R2 protocol software. At 
http://www.opencall.org/installing-mfcr2.html there are instructions for 
installing what I have released so far. This is the MFC/R2 protocol 
software, and a test program. The software to interface Asterisk to the 
MFC/R2 code will be released shortly. It used to work, but it hasn't 
been touched for a while, and Asterisk has changed somewhat. I need to 
realign my code with the way the current Asterisk CVS works.

In the meantime, if you have a working R2 line and Digium E1 card you 
can try the software with the test program. It is actually much easier 
debugging any compatibility issues between the software and the remote 
switch without Asterisk involved. So, if you want to be an early 
adopter, here is your chance. :-)

Regards,
Steve