[Asterisk-Users] Timing source on SMP system - Disable RTC forzaprtc

Matthew Boehm mboehm at cytelcom.com
Sun Sep 19 11:37:04 MST 2004


It was my understanding that you don't 'disable' rtc, but recompile it as a
kernel module.
Again, just my understanding as I can't try it until monday.

Matthew
----- Original Message ----- 
From: "Chad Brown" <chad.brown at identitymine.com>
To: "Michael Bielicki" <cypromis at gmail.com>; "Asterisk Users Mailing List -
Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Sent: Sunday, September 19, 2004 1:13 PM
Subject: RE: [Asterisk-Users] Timing source on SMP system - Disable RTC
forzaprtc


Does anyone know where to disable rtc support on redhat 9.0 using make
menuconfig?

I thought I disabled it but still got the following error when trying to
make zaprtc:

zaprtc.c:109: storage size of `rtc_irq_timer' isn't known
zaprtc.c:719: storage size of `rtc_fops' isn't known
zaprtc.c:107: warning: `DECLARE_WAIT_QUEUE_HEAD' declared `static' but
never defined
make: *** [zaprtc.o] Error 1

Thanks,

Chad

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michael
Bielicki
Sent: Saturday, September 18, 2004 9:20 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Timing source on SMP system

try zaprtc from www.junghanns.net. Works fine in my SMP systems


----- Original Message -----
From: Chad Brown <chad.brown at identitymine.com>
Date: Sat, 18 Sep 2004 20:23:54 -0700
Subject: [Asterisk-Users] Timing source on SMP system
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>




I need a timing device for the DL360G2 for conferencing and meetme.
For a timing device I have 2 X100P cards but neither will work in my
DL360G2. The system will not even boot with either card in the system.
Other PCI cards seems to work fine. I called Digium support and was
told that there must be a conflict between the card and my Compaq
DL360G2.



I then moved on to ztdummy. I'm sure the DL360 G2 has a OHBI rather
than UHBI controller. That said, I got this message during modprobe
ztdummy:



[root at impbx01 zaptel]# modprobe ztdummy

/lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o: init_module:
No such device

Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.

      You may find more information in syslog or the output from dmesg

/lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o: insmod
/lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o failed

/lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o: insmod ztdummy
failed



I then moved on to zaprtc. However, I was told that this solution will
not work with SMP systems. My DL360G2 is a dual proc machine.



I'm running out of options here...please advise.



Thanks,







Chad M. Brown
 Infrastructure Architect


identity mine, inc. - http://www.identitymine.com
 chad.brown at identitymine.com
 253.927.7737 - Office
 866.4ID.MINE (866.443.6463) - Toll free
 253.405.6726 - Cellular
 253.444.5170 - Fax



_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users





-- 
Michael Bielicki
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list