[Asterisk-Users] Connecting SPA-300 to Asterisk

[Joseph]

Thanks Mike, it did work after so much playing around. 
I guess none of those devices are coming with perfect installation
and/or configuration instructions.

#Joseph

On Sat, 2004-09-18 at 13:45, Mike Benoit wrote:
> What I did was create an extension that goes to my "mainmenu", ie:
> 
> exten => 7000,1,Goto(mainmenu,s,2)
> 
> Then I setup the SPA-3000 to dial that extension when a call comes in
> according to the FAQ entry on Sipura's website:
> http://www.sipura.com/support/spa3000faq/Section_3.html#4
> 
> 4:   How can I forward all PSTN callers to a VoIP number?
> A: You can use specify a dial plan to be used by the default PSTN caller with 
>    a hot line syntax: (S0<:voip_number>) where voip_number is replaced with 
>    the actual phone number (or sip url) of the VoIP destination.
> 
> So I used: (S0<:7000>)
> 
> Works like a charm.
> 
> In my experience Sipura has an excellent product, I use both the SPA-
> 2000 and SPA-3000, and they are both great. 
> 
> I've had _far_ less problems with Sipura products then I have had with
> Digium X100P cards. Especially when it comes to echo. Sipura's email
> support is also exceptional, I often get replies to emails within
> minutes, and they have even implemented feature requests and sent me a
> beta firmware within days. 
> 
> 
> On Sat, 2004-09-18 at 13:31 -0600, Joseph wrote:
> > On Fri, 2004-09-17 at 23:37, Kristian Kielhofner wrote:
> > > Sys. Concept Inc. wrote:
> > > 
> > > > How to Connect SPA-3000 to Asterisk so * will answer?
> > > > After setting up Asterisk on Gentoo the extension.conf contains [demo]
> > > > context; but my asterisk is not answering?
> > > > 
> > > > In SPA-3000 in PSTN Line - tab under Dial Plan 1 I have:
> > > > S0<:demo at 10.0.0.101>  
> > > > Default dial plan is set to 1.
> > > > My box's IP where Asterisk is running has IP: 10.0.0.101
> > > > Line 1 - tab has:
> > > > SIP Settings Port: 5060 
> > > > Nat is disabled as both Asterisk and SPA-3000 are behind firewall.
> > > > 
> > > > What am I missing?
> > > > 
> > > > --
> > > > #Joseph
> > > 
> > > Check this out from Voxilla:
> > > 
> > > http://voxilla.com/forum-viewtopic-t-557.html
> > > 
> > 
> > I checked their forum, actually Voxilla is the place I bought the
> > SPA-3000 unit from.
> > But the configuration instructions are not clear to me, there is a lot
> > of information but none is complete.
> > The SPA-3000 unit might be good but the configuration is nightmare and
> > Sipura manual is only good for reference nothing else in addition they
> > do not offer any support.
> > If I was to recommend any unit, go with Digium cards and stay away from
> > Siupra
> > 
> > --
> > #Joseph
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
--
#Joseph