[Asterisk-Users] SIP->Asterisk->GnuGK->Cisco 5300

[Tenorio, Leandro]

	TO use * with a 5300 using SIP, just make a dial-peer and send
the calls using dial(####@CiscoIP) should work, I'm using it go to and
from.
	Actually its MUCH MORE Stable to use * in native SIP. The code
for H323 it's not very updated.

LTenorio

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Carlos
Maynard
Sent: Saturday, September 18, 2004 12:18 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] SIP->Asterisk->GnuGK->Cisco 5300

Anyone has sample configuration files for this setup ?

Start calls from a Sip client... and terminate them on a Cisco
Gateway... going thru Asterisk and GnuGK?

I have SIP clients working ok through asterisk ...
I also have H323 Clients working great through GnuGK-> Cisco Gateway

What i've not been able to do is Terminate calls from SIP to the Cisco
Gateway.

Asterisk always get a security denial when trying to Register with
GnuGK.
Also... when i try to call from console i get a CallerNotRegistered
error.

I'd greatly appreciate anyone who can share Sample configuration files
for Asterisk and GnuGK.

Regards,

Carlos.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users