[Asterisk-Users] Re: hfc-s card, brii-stuff.0.1.0-RC4a, zaphfc: sync lost, pci performance too low. you might have some cpu throtteling enabled.

[Hartmut Wahl]

Hello,

i have exactly the same problem.

> Hi,
> debian sid
> kernel 2.6.7
> cpu: AMD Duron(tm) Processor

same dist, same kernel, same CPU, also bri-stuff RC4a

> kernel.log:
> Aug 23 17:33:40 weblogin kernel: Zapata Telephony Interface Registered on major 196
> Aug 23 17:33:40 weblogin kernel: zaphfc: no version for "zt_receive" found: kernel tainted.
> Aug 23 17:33:40 weblogin kernel: PCI: Found IRQ 10 for device 0000:00:0a.0
> Aug 23 17:33:40 weblogin kernel: PCI: Sharing IRQ 10 with 0000:00:07.5
> Aug 23 17:33:40 weblogin kernel: zaphfc: Digi International Digi
> DataFire Micro V (Europe) configured at mem 0xe091a000 fifo
> 0xcf598000(0xf598000) IRQ 10 HZ 1000
> Aug 23 17:33:40 weblogin kernel: zaphfc: Card 0 configured for TE mode
> Aug 23 17:33:40 weblogin kernel: zaphfc: 1 hfc-pci card(s) in this box.
> Aug 23 17:33:40 weblogin kernel: Registered tone zone 11 (Italy)
> Aug 24 04:47:57 weblogin kernel: zaphfc: sync lost, pci performance too
> low. you might have some cpu throtteling enabled.

I am running the card in NT-Mode, it happens some hours after zaphfc and
asterisk are loaded. It takes a lot of CPU load for syslogging (the
message repeats a lot) and asterisk connections are disturbed (fast
crackling). Last time it happend it was solved by unloading asterisk and
zaphfc and loading it again. The first time I had it I had to reboot,
otherwise ist startet just when I startet ztcfg.

> should i add MARCH=i586 option to asterisk/Makefile ?

Did you try it, did it help? Any other hints?

Greetings
  Hartmut

-- 
Hartmut Wahl <hwahl (at) hwahl (dot) de>
www: http://www.hwahl.de
PGP: http://www.hwahl.de/HartmutWahl.asc