[Asterisk-Users] incoming call rejected using IAX2 with FWD

[Ed Guy]

Bill,

There was an FWD provisioning problem a week or so ago
where after signing up for FWDIAX, you were able to register using IAX, 
but calls were not forwarded from SIP to IAX. 

This problem was fixed, but I'm not sure if the affected accounts 
were repaired.  As you found out, simply re-activating fixes the problem.

(This problem also impacted permanent forwarding, too.)

/ed


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Bill Seddon
Sent: Thursday, September 09, 2004 5:36 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] incomming call rejected using IAX2 with
FWD


I've also had problems receiving inbound IAX calls from FWD.  And without
any outbound problems.  I've three numbers and fortunately one worked while
two did not.  The one working number encouraged me to keep trying to work
out a reason for the difference.

In the end (today) I re-activated IAX for both of my FWD non-working
accounts and it started working again.  If you have not already tried
re-activating your IAX it might be one thing to try.

Bill Seddon

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Marty Mastera
Sent: September 09, 2004 10:19 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] incomming call rejected using IAX2 with FWD


> Works for me, follow the instructions closer.  :)
> 
> Storm D. J. Petersen wrote:
> 
> >Hi,
> >I cannot seem to accept incoming calls from FWD using IAX2.  
> I followed the
> >directions posted at www.fwd.pulver.com/advanced/iax   I can 
> make outgoing
> >calls fine using IAX via FWD.  When someone calls me from 
> FWD I get the 
> >following message:
> >        Chan_iax2.c:5251 socket_read: Reject connect attempt from
> >65.39.205.121
> >Any ideas?
> >


I had similar problems getting inbound from FWD....I had to do two
things:

1) Register with FWD (pretty standard, but I'll be thorough)

; Let FWD know where to send inbound calls
register => 484162:XXXXXXXXXXX at iax2.fwdnet.net

2) Create the FWD entry in IAX.conf (note that I found the name of the
entry makes a difference....ie "iaxfwd")

[iaxfwd]
type=user
context=fwd-in
auth=rsa
inkeys=freeworlddialup

Make sure that the context you specify for incoming calls exists and has
an extension entry matching your FWD number...also I didn't try it
without the RSA keys, but my configs use them and it works, so if you
aren't currently using them you might try that...I can't remember
exactly, but I think that the keys are included in the keys directory by
default as shipped with Asterisk...


Hope that helps, feel free to call me via FWD (484162 and x200) if I can
help, it would be good to have someone to call me to test....

Marty
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users




_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users