[Asterisk-Users] Zaptel errors with E100P + TDM40B

[Webn1]

Hello !

I try to use on the same server E100P + TDM40B without success.
When i add one one of them, no error on module load.

But when both are active, zaptel see strange configuration.

Here is my configuration :

zaptel.conf :
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

fxols=32-35

Error display :
# modprobe wct1xxp
ZT_CHANCONFIG failed on channel 32: No such device or address (6)
FATAL: Error running install command for wct1xxp

/proc/interrupts :
 0:     677723          XT-PIC  timer
  1:          8    IO-APIC-edge  i8042
  8:          4    IO-APIC-edge  rtc
  9:          0   IO-APIC-level  acpi
 14:       4409    IO-APIC-edge  ide0
 15:         13    IO-APIC-edge  ide1
177:     390032   IO-APIC-level  t1xxp
185:     193773   IO-APIC-level  wctdm
193:      22903   IO-APIC-level  eth0

I have also disable all motherboard extension as firewire, second ide
controler etc...

Any idea?

Thanks !