[Asterisk-Users] Wall-mounting UIP 200 and SoundPoint IP600 keepscoming off hook

[Reid A. Forrest]

The piece of plastic is built in to the IP600. Use a screwdriver or something
similar and push the little piece of plastic out from the top inside the
cradle. It will pop out, and you can turn it over and reinsert it upside down
to hold the receiver in place.


________________________________

	From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David Gomillion
	Sent: Friday, September 03, 2004 5:41 PM
	To: asterisk-users at lists.digium.com
	Subject: [Asterisk-Users] Wall-mounting UIP 200 and SoundPoint IP600
keepscoming off hook
	
	
	I am looking for a large number (probably about 100 or so) low-cost
phones that I can hang on the wall.  I need the phones to use PoE.  Do the
Uniden phones support wall-mounting?  These phones are not going to be
high-usage; they simply need to be there in case of an emergency.
	 
	Another question, along the same kind of lines, has anyone figured
out how to keep the SoundPoint IP 600 receiver on-hook?  Mine keeps being
pushed up by the little piece of plastic that is supposed to detect if it's
on-hook.  It looks like the handset already has the little hole for the hook,
but I didn't find said hook in the package.  Has anyone else had this
problem/found a solution?
	 
	Thanks,
	David Gomillion
	 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040904/b1e14c30/attachment.htm