[Asterisk-Users] Group Dial

[Tomica Crnek]

TRUNKBP=Zap/g2
 
This is E1 trunk to Ericsson BusinessPhone PBX.
The channel is not answered in that moment. First ring goes to all
phones, and after that only first phone continues ringing and only this
one can be answered.


________________________________

	From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Robinson
Tim-W10277
	Sent: Wednesday, September 01, 2004 6:01 PM
	To: Asterisk Users Mailing List - Non-Commercial Discussion
	Subject: RE: [Asterisk-Users] Group Dial
	
	
	What is your definition of TRUNKBP ?
	 
	It is probably because that channel is being answered first....
	 
	Rgds
	Tim

		-----Original Message-----
		From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tomica
Crnek
		Sent: 01 September 2004 15:19
		To: asterisk-users at lists.digium.com
		Subject: [Asterisk-Users] Group Dial
		
		
		Hi everyone,
		 
		I want to have a group and dial multiple phones/lines
simultaneously. If I use this Dial command:
		 
		exten =>
222,2,Dial(${TRUNKBP}/246&SIP/258&${TRUNKBP}/243,20,tTr)
		 
		... all phones ring just once, after that only the first
one continues ringing and only that one can answer. Can anyone tell me
why?
		 
		thanks!

		Tomica

		 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040903/1e38dadb/attachment.htm