AW: AW: [Asterisk-Users] WG: Digum TE410P

Henrik Pfluger pfluger at bellshare.com
Thu Sep 2 15:29:26 MST 2004 

Yes, they told me so. When I turn it off I only get endless messages:

ep  3 02:28:37 WARNING[98310]: chan_zap.c:1880 pri_find_dchan: No D-channels
available!  Using Primary on channel anyway 16!
  == Primary D-Channel on span 1 up
Sep  3 02:28:38 WARNING[98310]: chan_zap.c:1880 pri_find_dchan: No
D-channels available!  Using Primary on channel anyway 16!
  == Primary D-Channel on span 1 up
Sep  3 02:28:39 WARNING[98310]: chan_zap.c:1880 pri_find_dchan: No
D-channels available!  Using Primary on channel anyway 16!

> -----Ursprüngliche Nachricht-----
> Von: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] Im Auftrag von Michael Bielicki
> Gesendet: Freitag, 3. September 2004 00:13
> An: Asterisk Users Mailing List - Non-Commercial Discussion
> Betreff: Re: AW: [Asterisk-Users] WG: Digum TE410P
> 
> Hmm I have seen that behaviour before. Are you sure hansenet uses crc4 ?
> 
> On Fri, 2004-09-03 at 00:00, Henrik Pfluger wrote:
> > Thanks, I made the changes, but that did not help?!
> >
> > This is what Asterisk is telling me when I try to dial out. Incoming
> calls
> > are not signaled at all. When our carrier resets the E1, the first
> channel
> > sometimes works for a short time:
> >
> > *CLI>     -- B-channel 0/1 successfully restarted on span 1
> >     -- B-channel 0/2 successfully restarted on span 1
> >     -- B-channel 0/3 successfully restarted on span 1
> >     -- B-channel 0/4 successfully restarted on span 1
> >     -- B-channel 0/5 successfully restarted on span 1
> >     -- B-channel 0/6 successfully restarted on span 1
> >     -- B-channel 0/7 successfully restarted on span 1
> >     -- B-channel 0/8 successfully restarted on span 1
> >     -- B-channel 0/9 successfully restarted on span 1
> >     -- B-channel 0/10 successfully restarted on span 1
> >     -- B-channel 0/11 successfully restarted on span 1
> >     -- B-channel 0/12 successfully restarted on span 1
> >     -- B-channel 0/13 successfully restarted on span 1
> >     -- B-channel 0/14 successfully restarted on span 1
> >     -- B-channel 0/15 successfully restarted on span 1
> >     -- B-channel 0/17 successfully restarted on span 1
> >     -- B-channel 0/18 successfully restarted on span 1
> >     -- B-channel 0/19 successfully restarted on span 1
> >     -- B-channel 0/20 successfully restarted on span 1
> >     -- B-channel 0/21 successfully restarted on span 1
> >     -- B-channel 0/22 successfully restarted on span 1
> >     -- B-channel 0/23 successfully restarted on span 1
> >     -- B-channel 0/24 successfully restarted on span 1
> >     -- B-channel 0/25 successfully restarted on span 1
> >     -- B-channel 0/26 successfully restarted on span 1
> >     -- B-channel 0/27 successfully restarted on span 1
> >     -- B-channel 0/28 successfully restarted on span 1
> >     -- B-channel 0/29 successfully restarted on span 1
> >     -- B-channel 0/30 successfully restarted on span 1
> >     -- B-channel 0/31 successfully restarted on span 1
> >     -- Executing Dial("SIP/sipsnip.com-081b3798", "Zap/g1/c04044xxxxx")
> in
> > new stack
> >     -- Called g1/c04044506451
> >     -- Channel 0/1, span 1 got hangup
> >     -- Forcing restart of channel 0/1 on span 1 since channel reported
> in
> > use
> >     -- Hungup 'Zap/1-1'
> >   == No one is available to answer at this time
> >     -- Executing Hangup("SIP/sipsnip.com-081b3798", "") in new stack
> >   == Spawn extension (default, 5555, 2) exited non-zero on
> > 'SIP/sipsnip.com-081b3798'
> >     -- B-channel 0/1 successfully restarted on span 1
> >
> >
> > > -----Ursprüngliche Nachricht-----
> > > Von: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> > > bounces at lists.digium.com] Im Auftrag von Michael Bielicki
> > > Gesendet: Donnerstag, 2. September 2004 23:31
> > > An: Asterisk Users Mailing List - Non-Commercial Discussion
> > > Betreff: Re: [Asterisk-Users] WG: Digum TE410P
> > >
> > > You cannot take the primary clock from all 4 channels. So you must
> > > change your lines in zaptel.conf to:
> > >
> > > span=1,1,0,ccs,hdb3,crc4
> > > span=2,2,0,ccs,hdb3,crc4
> > > span=3,3,0,ccs,hdb3,crc4
> > > span=4,4,0,ccs,hdb3,crc4
> > >
> > > also why specify the groups double ?
> > >
> > > switchtype = euroisdn
> > > signalling = pri_cpe
> > > group = 1
> > > channel => 1-15,17-31
> > >
> > > cheers
> > >
> > > Michael
> > >
> > >
> > > On Thu, 2004-09-02 at 23:16, Henrik Pfluger wrote:
> > > > Hello,
> > > >
> > > > We recently installed a Wildcard TE410P, but we are having problems
> to
> > > make
> > > > it work reliably with a German E1 (Primaermultiplexanschluss PMX
> DSS1).
> > > Our
> > > > carrier (Hansenet in Hamburg, Germany) is using Nokia/Lucent
> switches.
> > > > The card is only able to set up the first B-channel (although it
> tells
> > > via
> > > > Asterisk, that all B-Channels have been successfully started). When
> > > > connecting a testing device to the E1 it is able to get all B-
> channels.
> > > When
> > > > switching the cord to the TE410P the card keeps the B-channels, but
> > > releases
> > > > them after the first incoming call (this is what our carrier told
> us).
> > > >
> > > > Sometimes it keeps a single channel long enough for us to make some
> > > calls.
> > > >
> > > > Is anyone experiencing the same problem? Maybe our configuration
> files
> > > are
> > > > incorrect?
> > > >
> > > > Can anyone help?
> > > >
> > > > Thank you,
> > > >
> > > > Henrik
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Zaptel.conf
> > > >
> > > > span=1,1,0,ccs,hdb3,crc4
> > > > bchan=1-15
> > > > dchan=16
> > > > bchan=17-31
> > > > span=2,1,0,ccs,hdb3,crc4
> > > > bchan=32-46
> > > > dchan=47
> > > > bchan=48-62
> > > > span=3,1,0,ccs,hdb3,crc4
> > > > bchan=63-77
> > > > dchan=78
> > > > bchan=79-93
> > > > span=4,1,0,ccs,hdb3,crc4
> > > > bchan=94-108
> > > > dchan=109
> > > > bchan=110-124
> > > > loadzone=de
> > > > defaultzone=de
> > > >
> > > >
> > > > Zapata.conf
> > > >
> > > > [channels]
> > > > language=en
> > > > context=default
> > > > switchtype=euroisdn
> > > > pridialplan=national
> > > > signalling=pri_cpe
> > > > usecallerid=yes
> > > > hidecallerid=no
> > > > callwaiting=yes
> > > > usecallingpres=yes
> > > > callwaitingcallerid=yes
> > > > threewaycalling=yes
> > > > transfer=yes
> > > > cancallforward=yes
> > > > callreturn=yes
> > > > echocancel=yes
> > > > echocancelwhenbridged=yes
> > > > rxgain=0.0
> > > > txgain=0.0
> > > > group=1
> > > > callgroup=1
> > > > pickupgroup=1
> > > > immediate=no
> > > >
> > > > group = 1
> > > > channel => 1-15
> > > >
> > > > switchtype = euroisdn
> > > > signalling = pri_cpe
> > > > group = 1
> > > > channel => 17-31
> > > >
> > > > switchtype = euroisdn
> > > > signalling = pri_cpe
> > > > group = 2
> > > > channel => 32-46
> > > >
> > > > switchtype = euroisdn
> > > > signalling = pri_cpe
> > > > group = 2
> > > > channel => 48-62
> > > >
> > > > switchtype = euroisdn
> > > > signalling = pri_cpe
> > > > group = 3
> > > > channel => 63-77
> > > >
> > > > switchtype = euroisdn
> > > > signalling = pri_cpe
> > > > group = 3
> > > > channel => 79-93
> > > >
> > > > switchtype = euroisdn
> > > > signalling = pri_cpe
> > > > group = 4
> > > > channel => 94-108
> > > >
> > > > switchtype = euroisdn
> > > > signalling = pri_cpe
> > > > group = 4
> > > > channel => 110-124
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Asterisk-Users mailing list
> > > > Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > To UNSUBSCRIBE or update options visit:
> > > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

More information about the asterisk-users mailing list