[Asterisk-Users] "Hiss" on Line, No ringing thru VoicePulse?

[Steve Totaro]

is there a "mute" setting, this can help isolate if its the mic or not.


----- Original Message ----- 
From: "Scott Sharkey" <ssharkey at linuxunlimited.com>
To: <asterisk-users at lists.digium.com>
Sent: Friday, October 29, 2004 1:59 PM
Subject: [Asterisk-Users] "Hiss" on Line, No ringing thru VoicePulse?


> Hi All,
> 
> Relatively new to *, but I've got it basically working.  I'm having a 
> bit of trouble and need a pointer on where to start.  I have a TDM400P 
> with one FXS and one FXO (Developer's kit), and also am using IAXComm on
> a PC with a headset and an Intel 810 sound card.  Calls from the headset 
> to a number via VoicePulse work, but there is a relatively loud hiss in
> the background.  I'm assuming the mike is too sensitive, maybe, but 
> couldn't find a way to adjust it anywhere in IAXComm.  IAXComm does 
> allow the speaker volume to be adjusted, and I need it almost all the
> way to the top to hear anything.
> 
> Second part: When I dial from an analog phone attached to the TDM400P,
> it seems to work just fine through VoicePulse, but I'm getting no
> ring indications.  There is some faint background noise, but not as
> noticable as the hiss above.  I believe that I have echo suppression
> turned on for the FXS/FXO ports, but no idea why I'm not getting
> ring indications.
> 
> Any suggestions would be much appreciated.
> 
> -Scott
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>