[Asterisk-Users] UK CallerID

[Alex Barnes]

Hi George,

Could you send me your ISDN config if possible.

I managed to get my new BT ISDN30 line working last night but wasn't
getting any incoming callerid.
I hoped this was because I only asked BT to enable CallerID yesterday
morning.

The ISDN is on a different site so its not easy for me to test at the
moment, hence why I would like to confident I have it setup correctly.

Thanks very much

Alex

-----Original Message-----
From: George Gardiner [mailto:asterisk at georgej.demon.co.uk] 
Sent: 27 October 2004 10:29
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] UK CallerID



Sometime ago I posted a query about CallerID not working on one of my
analog channels on my BT Home Highway ISDN.  It subsequently turns out
that I only had CallerID enabled on one of the analog numbers, not both.
Entirely my fault for not checking both lines.

Now that CallerID is enabled on the second channel it works a treat.
Many thanks to everyone who did the programming on this.

Presumably one can set the CallerID commands in zapata.conf on a per
channel basis, or is this a global setting?   Apologies if that is an
elementary question which I should already know.  If it is a global
setting, then that means you would not be able to enable CallerID if
some of the lines are not CallerID enabled.  (Asterisk won't answer a
line if it is expecting CallerID and it isn't enabled.)


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


This email and any attached files are confidential and copyright protected.  If you are not the addressee, any dissemination, distribution or copying of this communication is strictly prohibited.  Unless otherwise expressly agreed in writing, nothing stated in this communication shall be legally binding.