[Asterisk-Users] Quintum A800 OH323 problem

[Ender Erbey]

Hi,

Thanks a lot! H245 Tunelling solved my problem.

Ender Erbey
conacom GmbH

Vlasis Hatzistavrou wrote:

> Hello,
>
> As a start, you can change h245Tunnelling to yes. This will probably 
> solve the problem, as I would receive the messages that you described 
> when I had problems with the H245 negotiation.
>
> In addition what are your [codecs] settings in oh323.conf? I assume 
> that you use G729A on the A800 as is shown on the diagram, but what 
> about the settings that you have on the Asterisk side?
>
> Also, which version of  Asterisk are you using?
>
> Best regards,
> Vlasis.
>
> Ender Erbey wrote:
>
>> Hi,
>>
>> I am using
>>
>> open323 version: 1.13.5
>> pwlib verison : 1.6.6
>> OH323 version: 0.6.3b
>>
>> Can this be a configuration problem? Here is my config data:
>>
>> [general]
>>
>> listenAddress=xxx.xxx.xxx.xxx
>> listenPort=1720
>> connectPort=1720
>> tcpStart=10000
>> tcpEnd=20000
>> udpStart=10000
>> udpEnd=20000
>> fastStart=yes
>> h245Tunnelling=no
>> h245inSetup=yes
>> inBandDTMF=no
>> silenceSuppression=no
>> jitterMin=20
>> jitterMax=100
>> ipTos=none
>> outboundMax=10
>> inboundMax=10
>> simultaneousMax=10
>> wrapLibTraceLevel=1
>> libTraceLevel=3
>> libTraceFile=tr.out
>> gatekeeper=DISABLE
>> userInputMode=TONE
>> amaFlags=default
>> accountCode=H323
>> context=htest
>>
>> Thanks,
>>
>> Ender Erbey
>> conacom GmbH
>>
>> Vlasis Hatzistavrou wrote:
>>
>>> Hello,
>>>
>>> I am passing traffic between Asterisk and A800's with OH323 without 
>>> problems. No calls are disconnected after 20 seconds.
>>>
>>> Which version of Asterisk, OH323, pwlib and openh323 are you running?
>>>
>>> Best regards,
>>> Vlasis.
>>>
>>> Ender Erbey wrote:
>>>
>>>> Hi,
>>>>
>>>> I experienced an interesting problem when i try to make such a 
>>>> connection
>>>>
>>>> BRI --> Asterisk (OH323) --> Quintum A800   codec g729a
>>>>
>>>> Call begins without problem but it is closed after nearly 20 
>>>> seconds. Reason : EndedByRemote
>>>>
>>>> When i terminate call at cisco gateways with same configuration 
>>>> there is no problem. But with Quintum i have this problem.
>>>>
>>>> Have someone an idea about this problem?
>>>>
>>>> Thanks,
>>>>
>>>> Ender Erbey
>>>> conacom GmbH
>>>>
>>>>
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>>
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>