[Asterisk-Users] Quintum A800 OH323 problem

Vlasis Hatzistavrou vhatz at auth.gr
Mon Oct 25 07:02:13 MST 2004


Hello,

As a start, you can change h245Tunnelling to yes. This will probably 
solve the problem, as I would receive the messages that you described 
when I had problems with the H245 negotiation.

In addition what are your [codecs] settings in oh323.conf? I assume that 
you use G729A on the A800 as is shown on the diagram, but what about the 
settings that you have on the Asterisk side?

Also, which version of  Asterisk are you using?

Best regards,
Vlasis.

Ender Erbey wrote:

> Hi,
>
> I am using
>
> open323 version: 1.13.5
> pwlib verison : 1.6.6
> OH323 version: 0.6.3b
>
> Can this be a configuration problem? Here is my config data:
>
> [general]
>
> listenAddress=xxx.xxx.xxx.xxx
> listenPort=1720
> connectPort=1720
> tcpStart=10000
> tcpEnd=20000
> udpStart=10000
> udpEnd=20000
> fastStart=yes
> h245Tunnelling=no
> h245inSetup=yes
> inBandDTMF=no
> silenceSuppression=no
> jitterMin=20
> jitterMax=100
> ipTos=none
> outboundMax=10
> inboundMax=10
> simultaneousMax=10
> wrapLibTraceLevel=1
> libTraceLevel=3
> libTraceFile=tr.out
> gatekeeper=DISABLE
> userInputMode=TONE
> amaFlags=default
> accountCode=H323
> context=htest
>
> Thanks,
>
> Ender Erbey
> conacom GmbH
>
> Vlasis Hatzistavrou wrote:
>
>> Hello,
>>
>> I am passing traffic between Asterisk and A800's with OH323 without 
>> problems. No calls are disconnected after 20 seconds.
>>
>> Which version of Asterisk, OH323, pwlib and openh323 are you running?
>>
>> Best regards,
>> Vlasis.
>>
>> Ender Erbey wrote:
>>
>>> Hi,
>>>
>>> I experienced an interesting problem when i try to make such a 
>>> connection
>>>
>>> BRI --> Asterisk (OH323) --> Quintum A800   codec g729a
>>>
>>> Call begins without problem but it is closed after nearly 20 
>>> seconds. Reason : EndedByRemote
>>>
>>> When i terminate call at cisco gateways with same configuration 
>>> there is no problem. But with Quintum i have this problem.
>>>
>>> Have someone an idea about this problem?
>>>
>>> Thanks,
>>>
>>> Ender Erbey
>>> conacom GmbH
>>>
>>>
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>





More information about the asterisk-users mailing list