[Asterisk-Users] Iaxy authentication

[Me]

Nevermind folks... I figured it out..

Let's just say Doh! and leave it at that.. :)

Todd

--
Start Your Own ISP!
http://www.YourOwnISP.com


----- Original Message ----- 
From: "Me" <mylist at lightwavetech.com>
To: <joe at dennick.net>; "Asterisk Users Mailing List - Non-Commercial 
Discussion" <asterisk-users at lists.digium.com>
Sent: Sunday, October 24, 2004 9:23 PM
Subject: Re: [Asterisk-Users] Iaxy authentication


> Yeah, I did all this but the Asterisk console still gives me the errors I 
> listed previously.
>
> Thanks anyhow, anyone else have any idea why I am getting this:
> *******
> Oct 24 15:15:11 NOTICE[131080]: chan_iax2.c:3865 register_verify: No
> registration for peer '100' (from <MyIPwasHere>)
> *******
>
> Thanks,
> Todd
> --
> Start Your Own ISP!
> http://www.YourOwnISP.com
>
>
> ----- Original Message ----- 
> From: "Joe Dennick" <joe at dennick.net>
> To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" 
> <asterisk-users at lists.digium.com>
> Sent: Sunday, October 24, 2004 4:35 PM
> Subject: RE: [Asterisk-Users] Iaxy authentication
>
>
> I bought out IAXy devices from NetXUSA, who also sent me this short
> installation document which I've copied below:
>
> Quick Start Guide for Digium IAXY Device
>
>
> · Determine the IP address of each unit by viewing the logs on
> your DHCP Server to see which IP address your IAXY has taken,  you
> cannot reserve IP address based on the MAC address. You may however
> define a static IP address after the initial setup.
> · Login to Asterisk’s CVS and checkout  “iaxyprov”, then do a make
> · Once your in the iaxyprov directory edit the iaxy.sample.conf
> file or create a new configuration file
> · Define the IP address or if you wish to continue to use DHCP,
> assign a unique user name for your device, password, codec, and the
> Asterisk Server it will register with. For an example see the
> iaxy.sample.conf file
> · Once you have defined your iaxy.conf file proceed to run
> iaxyprov. The format is as follows:
> ./iaxyprov <IP Address> <iaxy.conf File name>
>
> You should receive a confirmation back that the data was
> received, Repeat these same steps for each
> IAXY device, changing only the user name and IP address if not
> using DHCP
> · Next, you need to configure the Iax.conf file under
> /etc/asterisk. Create each user, see the sample configuration below
>
> [100] ;User 100
> type=friend
> username=100
> secret=1234
> context=default
> disallow=all
> allow=ulaw
> mailbox=1234
>
> · Lastly, the format for the IAXY devices in extensions.conf is
> IAX2/<User>
> Exten => 100,1,Dial(IAX2/100)
>
>
> For further questions please contact NETXUSA Technical support Monday –
> Friday 9 am est – 6 pm est or refer to the Asterisk user list for help.
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Me
> Sent: Sunday, October 24, 2004 3:24 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Iaxy authentication
>
>
> Hello, working on trying to get the Iaxy setup from behind a NAT.
>
> I have done everything the way I think it should be done but I can't
> seem to
> get dial tone and each time the device trys to register with * I get
> this
> message on the console:
>
> *******
> Oct 24 15:15:11 NOTICE[131080]: chan_iax2.c:3865 register_verify: No
> registration for peer '100' (from <MyIPwasHere>)
> *******
>
> Each time I actually pickup the phone connected to the Iaxy I get this:
>
> ******
> Oct 24 15:16:55 NOTICE[131080]: chan_iax2.c:5390 socket_read: Rejected
> connect attempt from 67.166.254.124
> ******
>
> Seems that the authentication is not working..
>
> I have set the user: and pass: fields in the iaxy_ext.conf which is fed
> into
> the iaxy and set the "accountcode:" in iax.conf to be the same as the
> "user:" field in the file that is fed into the Iaxy, is that correct or
> does
> the username go somewhere else. I have set the "secret:" the same as the
>
> "password:" field in the file that's fed into the iaxy.
>
> What have I missed here, I have dug and looked in the Wiki, Google,
> Digium
> site, list archives and there does not appear to be all that much
> documentation that I can find on setting this device up.
>
> Any help would be appreciated..
>
> Thanks,
> Todd
>
> --
> Start Your Own ISP!
> http://www.YourOwnISP.com
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.778 / Virus Database: 525 - Release Date: 10/15/2004
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.778 / Virus Database: 525 - Release Date: 10/15/2004
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users