[Asterisk-Users] IAX wireless problem

[Benjamin on Asterisk Mailing Lists]

On Sat, 23 Oct 2004 17:10:40 +0200, Neal Nelson <neal at nelsonnet.org> wrote:
> I'm using IAXComm on the Mac to connect to my Asterisk system and it
> all seems to work well when I'm connected to my wired network. When I
> use wireless instead, IAXComm never registers with Asterisk and when I
> call, ASterisk seems to think it's connected but no sound comes back.

did you define your client as host=dynamic in iax.conf?

use "iax2 debug" on the asterisk console to get a session transcript
when you try to register and make test calls.

if there are no Rx-Frame messages coming in from the client, then you
have some sort of connectivity problem with your wireless setup. Use
tcpdump or ethereal to see if any traffic is coming in on port 4569.

rgds
benjk

-- 
Sunrise Telephone Systems, 9F Shibuya Daikyo Bldg., 1-13-5 Shibuya,
Tokyo, Japan.

NB: Spam filters in place. Messages unrelated to the * mailing lists
may get trashed.