[Asterisk-Users] beginners questions

[Doug Reid -Stormcorp]

The best way to do that would be installing a Asterisk box on either side
as the call would only use 8k IAX per call. There will be some config on the
Cisco
side.

Doug Reid
Director
Stormcorp Network Solutions (Pty) Ltd
Tel:    +27 11 807 1141
Fax:    +27 11 807 3504
Mobile: +27 83 989 0008
E-Mail: doug at stormcorp.co.za
Web:    www.stormcorp.co.za


---
NOTICE - This message contains privileged and confidential information
intended only for the use of the addressee named above. If you are not the
intended recipient of this message, you are hereby notified that you must
not disseminate, copy or take any action in reliance on it. If you have
received this message in error, please notify Stormcorp Network Solutions,
its subsidiaries or associates, immediately. Any views expressed in this
message are those of the individual sender, except where the sender
specifically
states them to be the view of Stormcorp, its subsidiaries or
associates.

  -----Original Message-----
  From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Mark Berkhoff
  Sent: Thursday, October 21, 2004 2:33 PM
  To: asterisk-users at lists.digium.com
  Subject: [Asterisk-Users] beginners questions


  Hi
  I'm just starting to experiment with voip and asterisk have have the
following question:
  Would it be possible to setup asterisk at home and have it connected our
office phone system which is running cisco callmanager and cisco ip phones?
  Would it require configuration on the callmanager site or could it just
emulate my office phone at home (including the extension number) ?
  I do have a VPN connection to the office and are able to ping the
callmanager.

  Many thanks,
  Mark Berkhoff

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041021/11dd14b4/attachment.htm