[Asterisk-Users] Cisco 7960G "disk full error"

[Andrew Edmond]

Right you are!

>From my dated 2000 firmware, using the UAL (at 125k-ish), the phone updated
GREAT to 7.1 (and about to go to 7.2).

Thanks bkw!

Andrew

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Brian West
> Sent: Tuesday, October 12, 2004 3:21 PM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] Cisco 7960G "disk full error"
> 
> 
> > I upgraded 6 7960G's the other week, all at the same time, all 
> > starting with year 2000 SCCP firmware on them.
> > 
> > You cannot upgrade these phones directly to SIP7.2.
> 
> Actually you can.  You put in your OS79XX.TXT P003-07-2-00 
> which is the UAL. The UAL is around 125k, then in your .cnf 
> files ie SIPDefault.cnf you put P0S3-07-2-00.  The reason you 
> can't upgrade some older SCCP phones is the buffer in the 
> phone isn't large enough to take a load that's larger than 
> about 400K.  You should be able to load the UAL without a 
> problem on most phones.  I have done it more than a dozen 
> times without a problem.
> 
> bkw
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/aster> isk-users
> To 
> UNSUBSCRIBE or update options visit:
>    
http://lists.digium.com/mailman/listinfo/asterisk-users