[Asterisk-Users] Zaptel 1.0.0. will not compile

[Remco Barende]

On Tue, 12 Oct 2004, Christopher L. Wade wrote:

> Remco Barende wrote:
>> OK, I tried compiling from tarball.
>> 
>> I got the zaptel-1.0.0.tar.gz. I untarred it. In that directory where the 
>> tarball unpacked I just duid 'make linux26' (without doing a ./configure or 
>> any changes). Zaptel started compiling but gave the same errors about crc 
>> errors:
>> 
>> *** Warning: "zt_ec_chunk" [/tmp/zaptel-1.0.0/wcfxs.ko] has no CRC!
>> *** Warning: "zt_transmit" [/tmp/zaptel-1.0.0/wcfxs.ko] has no CRC!
>> *** Warning: "zt_receive" [/tmp/zaptel-1.0.0/wcfxs.ko] has no CRC!
>> *** Warning: "zt_unregister" [/tmp/zaptel-1.0.0/wcfxs.ko] has no CRC!
>> *** Warning: "zt_qevent_lock" [/tmp/zaptel-1.0.0/wcfxs.ko] has no CRC!
>> *** Warning: "zt_hooksig" [/tmp/zaptel-1.0.0/wcfxs.ko] has no CRC!
>> *** Warning: "zt_alarm_notify" [/tmp/zaptel-1.0.0/wcfxo.ko] has no CRC!
>> *** Warning: "zt_transmit" [/tmp/zaptel-1.0.0/wcfxo.ko] has no CRC!
>> *** Warning: "zt_receive" [/tmp/zaptel-1.0.0/wcfxo.ko] has no CRC!
>> *** Warning: "zt_ec_chunk" [/tmp/zaptel-1.0.0/wcfxo.ko] has no CRC!
>> *** Warning: "zt_hooksig" [/tmp/zaptel-1.0.0/wcfxo.ko] has no CRC!
>> and whole lot more.
>> 
>> I have 2 symlinks in my /usr/src directory, ./linux-26 and ./linux
>> 
>> Strange that it does not even work from the tarball
>
> Um, those are 'Warnings', not *Errors*, have you tried using the drivers? 
> ie, have you insmod'd them or modprobe'd them?  Pardon if haven't fully 
> followed this thread and my comments are of no value, just my $0.02 anyway.

OK, thanks for explaining I thought it was something really serious :)

Yes, I did install the modules it created but it will not find the X100P 
in the system

ztcfg -vvvvvvv
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
ZT_CHANCONFIG failed on channel 1: No such device or address (6)