[Asterisk-Users] Generic X100P's

[Steven Critchfield]

On Mon, 2004-10-11 at 13:41 -0700, Erik Espinoza wrote:
> Alright, I'd like to start out by saying that this is just a proof of
> concept. The final configuration will include the purchase of a couple
> of TDM400P's so all flames for using cheap Winmodems please divert
> yourselves to /dev/null and don't waste my bandwidth or your time
> responding.
> 
> I've noticed that all documentation online talks about how to
> configure a single x100p (or generic) in /etc/zaptel.conf and
> /etc/asterisk/zapata.conf. My question is I need to use two for a
> proof of concept at work. I have a lot of experience with a purely
> voip (voicepulse, voipjet, fwd, and iaxtel) so I feel I understand
> asterisk's flow and configuration really well.
> 
> My question is, for using two x100p's are there any changes that need
> to happen from the basic x100p config I've seen online. Here's what
> I'm using:

Since every zapata card generates 1k interupts per second and needs to
be on it's own interupt, your demo with 2 cheap winmodems isn't going to
be representative of your final config. 
-- 
Steven Critchfield <critch at basesys.com>