[Asterisk-Users] Generic X100P's

[Erik Espinoza]

Alright, I'd like to start out by saying that this is just a proof of
concept. The final configuration will include the purchase of a couple
of TDM400P's so all flames for using cheap Winmodems please divert
yourselves to /dev/null and don't waste my bandwidth or your time
responding.

I've noticed that all documentation online talks about how to
configure a single x100p (or generic) in /etc/zaptel.conf and
/etc/asterisk/zapata.conf. My question is I need to use two for a
proof of concept at work. I have a lot of experience with a purely
voip (voicepulse, voipjet, fwd, and iaxtel) so I feel I understand
asterisk's flow and configuration really well.

My question is, for using two x100p's are there any changes that need
to happen from the basic x100p config I've seen online. Here's what
I'm using:

/etc/zaptel.conf
defaultzone=us
fxsks=1

/etc/asterisk/zapata.conf
signalling=fxs_ks
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
callerid=asreceived
group=1
context=recieved
channel => 1

Examples would be appreciated.

Thanks,
Erik