[Asterisk-Users] Working Wellgate *SIP* 38xx/35xx hardware anyone?

[Vahan Yerkanian]

I'm loosing hair at cosmic speed now for the past 10 days.

Welltech's Wellgate 38xx/35xx FXO/FXS SIP hardware versions seem to have 
very buggy firmware possibly due to hastely done porting from H.323 
firmware.

Is there anyone on this mailing list who was able to:

1. setup a 35xxA FXS with all ports authenticating properly with *?
or
2. setup a 38xx FXO to work as dial-in from pstn to * fixed sip number 
and dial-out to pstn with prefix change WHILE having normal two-way 
voice working? If I call from pstn to the FXO's #, I hear voice ok both 
ways, but if I dial out form a sip phone via FXO's line1 out to a phone, 
then sip phone's voice isn't heard on the pstn phone.

Also, FXO doesn't detect the busy signal properly, if I hangup pstn 
phone, i can hear the busy tone on the sip phone. And yes, I've done 
frequency analysis for the busy tone using Adobe Audition 1.5 
(ex-cooledit pro).

AND FINALLY, anyone has received ANY email from Welltech sales/support 
emails?

here is the snip from my extensions.conf, anything wrong?

exten => _3741XXXXXX,1,Dial(SIP/1111${EXTEN:4}@x.y.z.x,60)
exten => _3741XXXXXX,2,Congestion
exten => _3741XXXXXX,3,Hangup
exten => _3741XXXXXX,102,Congestion
exten => _3741XXXXXX,103,Hangup


regards,
Vahan