[Asterisk-Users] [OT] Sipura-3000 - Immediate hangup on inbound PSTN calls

Mike Benoit ipso at snappymail.ca
Sat Oct 2 11:07:22 MST 2004


I'm seeing something similar. I upgraded Asterisk to v1.0 (then 1.0.1),
and the SPA3K firmware to the latest and outgoing calls over the SPA3K
stopped working, and incoming calls get dropped randomly after about
20minutes.

I sent an email to Sipura support, but haven't heard back yet.

On Sat, 2004-10-02 at 11:24 -0600, Rich Adamson wrote:
> > My apologies for the off-topic post ...
> > 
> > No matter what settings I try, when I dial in to the SPA-3000 on the
> > PSTN line, it picks up the call and immediately gives me a fast busy
> > tone then hangs up. The info tab says under PSTN Line status:
> > 
> > Last PSTN Disconnect Reason: PSTN Disconnect Tone
> > 
> > which seems to indicate that the SPA thinks the caller has hung up.
> > 
> > Since I am in Japan, it is possible that the SPA simply doesn't work
> > here. Or perhaps, some of the FXO parameters need to be changed. So,
> > my question is this: Has anybody experienced similar problems with an
> > SPA outside of the US and if so, did anybody find a fix/workaround?
> 
> Just seen the same thing here this morning (in the US). I had tested
> outgoing pstn calls from * a couple of weeks ago and it worked fine.
> Now it does not work. However, an ethereal trace indicates * is not
> sending a dial string to the spa3k. Is that due to changes that occurred
> with *, or, spa3k firmware upgrade that happened at roughly the same 
> time (here). I don't know at this point. Without digging into it, I'd
> have to guess (with absolutely no facts to back it up) that changes
> with the sip protocol handling within * has something to do with it.
> 
> Outgoing calls via the spa3k is not our primary dialplan, so not sure
> when it broke.
> 
> Rich
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Mike Benoit <ipso at snappymail.ca>




More information about the asterisk-users mailing list