[Asterisk-Users] zap fxo hangs after upgrade to stable v1-0

[Lyle Giese]

I would suggest changing * from ls to ks on that line.

I use ks on my three loopstart pots lines from SBC in my office.

Lyle

----- Original Message ----- 
From: "Jason Kawakami" <jkkawakami at optellabs.com>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, November 24, 2004 10:14 AM
Subject: [Asterisk-Users] zap fxo hangs after upgrade to stable v1-0


> so i have been running v1-0 on all of my test boxes for about a month now
> testing iax/sip/res_xxx.  I decided to put it into production so I updated
a
> box that was running 0.9.? that had been working perfectly for months and
> low and behold the inbound line from telco now intermittantly doesn't
clear
> and none of the other channels can dial out on that line.  I have tested
the
> line in this state and it is closed (from telco) but * reports at the CLI
> that it cannot create a channel of type zap because everything is
congested
> at this time.  The line is a loopstart line from Qwest (yeah I know, no
> supervision etc, but it was working fine b4).
>
> I am totally at a loss as to where to go from here.  Any suggestions would
> be appreciated.
>
> zapata.conf
> [channels]
> usecallerid=yes
> callwaiting=no
> callwaitingcallerid=no
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callprogress=yes
> rxgain=0.0
> txgain=0.0
> group=1
> immediate=no
> context=incoming
> signalling=fxs_ls
> channel=1
>
> zaptel.conf
> fxsls=1
> fxoks=2
> fxoks=3
> loadzone = us
> defaultzone=us
>
> [dialout]
> exten => _9NXXXXXX,1,StripMSD,1
> exten => _NXXXXXX,2,Dial(Zap/1/w${EXTEN})
> exten => _NXXXXXX,3,Hangup
>
> Thanks
>
> Jason Kawakami
> www.optellabs.com
> Salt Lake City, UT
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>