[Asterisk-Users] cisco dial-peer voip

[Jan Baggen]

I have 2610 XM with 1 Fastethernet and VIC2-2BRI. Dialin and dialout over 
pots is ok. Also inbound pots calls get redirected to Asterisk y.y.y.y  
So far so good.

But I want to setup VOIP sessions with local carrier. I added dial-peer 
40 for this. Session target x.x.x.x But calls will always get routed to 
the pstn peers 50 and 60. Peer x.x.x.x is never contacted or tried.

My situation:
PSTN -> CISCO -> ASTERISK  OK
ASTERISK -> CISCO -> PSTN  OK
ASTERISK -> CISCO -> VOIP  NOT OK (only needs outbound calls)


SIP01#sh dial-peer voice summary
dial-peer hunt 0
TAG    TYPE  MIN  OPER PREFIX    DEST-PATTERN      FER THRU SESS-TARGET STAT
PORT
10     pots  up   up                                0 down 1/0/0
20     pots  up   up                                0 down 1/0/1
30     voip  up   up             2012345..          0  syst
ipv4:y.y.y.y:5060
40     voip  up   up             .+                 0  syst
ipv4:x.x.x.x:5060
50     pots  up   up             .+                 5 up   1/0/0
60     pots  up   up             .+                 5 up   1/0/1



dial-peer voice 10 pots
 description INBOUND CALLS PSTN BRI0
 incoming called-number 2012345..
 no digit-strip
 direct-inward-dial
 port 1/0/0
!
dial-peer voice 20 pots
 description INBOUND CALLS PSTN BRI1
 incoming called-number 2012345..
 no digit-strip
 direct-inward-dial
 port 1/0/1
!
dial-peer voice 30 voip
 description INBOUND CALLS VOIP ASTERISK
 destination-pattern 2051860..
 session protocol sipv2
 session target ipv4:y.y.y.y:5060
 session transport udp
 dtmf-relay sip-notify
 codec g711alaw
 no vad
!
dial-peer voice 40 voip
 description OUTBOUND CALLS VOIP CARRIER
 destination-pattern .+
 session protocol sipv2
 session target ipv4:x.x.x.x:5060
 session transport tcp
 dtmf-relay sip-notify
 codec g711alaw
 no vad
!
dial-peer voice 50 pots
 tone ringback alert-no-PI
 description OUTBOUND CALLS PSTN BRI0
 preference 5
 destination-pattern .+
 no digit-strip
 port 1/0/0
!
dial-peer voice 60 pots
 tone ringback alert-no-PI
 description OUTBOUND CALLS PSTN BRI1
 preference 5
 destination-pattern .+
 no digit-strip
 port 1/0/1