[Asterisk-Users] TE410P lights don't blink red after the module is loaded

[mvickers]

subject should have read "red" not read

Mark F. Vickers wrote:
> Greetings,
> 
> According to the FAQ "When you load the module and have no 
> circuit/channel bank the LED's should flash red"
> 
> I get the "knight rider" lights before the module loads, but after the 
> modules are loaded I don't get any lights, other equipment plugged in or 
> not.
> 
> The card has been on my shelf a while so I wonder if it needs a firmware 
> upgrade ?  Can the cards be firmware upgraded?
> 
> I got the modules from CVS, are they packaged with version version 1.0.2 
> some place or is getting the modules from CVS the correct thing to do?
> 
> Config files are below.
> 
> Thanks
> 
> Mark Vickers
> RealNetworks, Inc.
> 
> 
> ____________________________________________________________
> 
> root at asterisk:~# /sbin/modprobe zaptel
> root at asterisk:~# /sbin/modprobe wct4xxp
> 
>  From dmesg:
> 
> Zapata Telephony Interface Registered on major 196
> Found TE410P at base address fc200000, remapped to e088f000
> TE410P version c01a003a, burst ON
> FALC version: 00000005, Board ID: 00
> Reg 0: 0x1b96b800
> Reg 1: 0x1b96b000
> Reg 2: 0x07fc07fc
> Reg 3: 0x00000000
> Reg 4: 0x00000000
> Reg 5: 0x00000000
> Reg 6: 0xc01a003a
> Reg 7: 0x00001000
> Reg 8: 0x00000000
> Reg 9: 0x00ff0000
> Reg 10: 0x00000000
> TE410P: Launching card: 0
> TE410P: Setting up global serial parameters
> Found a Wildcard: Wildcard TE410P-Xilinx
> 
> 
> 
>  From the FAQ.
> 
> Q.    When will the LED lights come on, on my 
> T100P/E100P/T400p/E400P/TE4XXP? What about the TE410P? What about the 
> TDM400P?
> A.    For the T100P/E100P/T400p/E400P/TE4XXP cards there will be no 
> lights on the cards until the module is loaded. When you load the module 
> the lights should flash red. When a channel bank or circuit are 
> connected to the card, they should turn green with the module loaded. 
> For the TE410P the LED's should scroll(knightrider) even without the 
> module being loaded or anything plugged in. When you load the module and 
> have no circuit/channel bank the LED's should flash red. With the module 
> loaded and a circuit/channel bank connected they should be solid green. 
> For the TDM400P, when you load the module they LED's will come on green. 
> If the module is not loaded they won't be on at all. They do not change 
> if a phone is plugged in or not.
> 
> 
> root at asterisk:~# cat /etc/asterisk/zapata.conf |grep -v "^;"
> 
> [channels]
> context=default
> switchtype=national
> signalling=em_w
> rxwink=2500             ; Atlas seems to use long (250ms) winks
> start=250
> debounce=333
> usecallerid=yes
> hidecallerid=yes
> callwaiting=no
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> relaxdtmf=yes
> #rxgain=-10.1
> #txgain=-10.1
> group=1
> callgroup=1
> pickupgroup=1
> 
> immediate=no
> musiconhold=default
> 
> signalling=em_w
> 
> channel => 1-24
> 
> root at asterisk:~#
> 
> 
> 
> root at asterisk:~# cat /etc/zaptel.conf |grep -v "^#"
> span=1,2,0,esf,b8zs
> e&m=1-24
> loadzone = us
> defaultzone=us
> root at asterisk:~#
> 
> 
> root at asterisk:~# lsmod
> Module                  Size  Used by    Not tainted
> wct4xxp                51680   0  (unused)
> zaptel                176640   0  [wct4xxp]
> ipt_state                568   4  (autoclean)
> ipt_REJECT              3480   1  (autoclean)
> iptable_mangle          2136   0  (autoclean) (unused)
> iptable_nat            23256   0  (autoclean) (unused)
> ip_conntrack           30376   2  (autoclean) [ipt_state iptable_nat]
> iptable_filter          1740   1
> ip_tables              15360   7  [ipt_state ipt_REJECT iptable_mangle 
> iptable_nat iptable_filter]
> e1000                  67648   1
> root at asterisk:~#
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users