[Asterisk-Users] Re: How to test if PCI 2.2?

[David Cook]

When I cat /var/log/dmesg | grep PCI, I get this:
PCI: PCI BIOS revision 2.10 entry at 0xfc7ce, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered primary peer bus 01 [IRQ]
PCI: Using IRQ router ServerWorks [1166/0200] at 00:0f.0
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
SvrWks OSB4: IDE controller at PCI slot 00:0f.1
PCI: Found IRQ 10 for device 01:02.0
PCI: Found IRQ 15 for device 01:02.1
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
PCI: Assigned IRQ 5 for device 00:0f.2


Does this first line confirm that I am PCI 2.1. I tried it on several
machines that I have access to and they all say 2.10. I recognize that
this means I'm out of luck for a TDM4xx card, but is this an accurate
enough test or might the OS be somehow fibbing?

dbc.

> Message: 5
> Date: Sun, 28 Nov 2004 08:31:47 +0800
> From: Ronald Wiplinger <ronald at elmit.com>
> Subject: [Asterisk-Users] How to test if PCI 2.2?
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> 	<asterisk-users at lists.digium.com>
> Message-ID: <41A91C73.4050306 at elmit.com>
> Content-Type: text/plain; charset=us-ascii; format=flowed
>
> Is there a way to test if the motherboard is ready for a Digium card
> (PCI 2.2) ?
>
> I would like to know from a remote computer, where I have (root)
> access,
> if this computer is ready for a TDM22B.
>
> bye
>
> Ronald