[Asterisk-Users] How to test if PCI 2.2?

[Ronald Wiplinger]

Leo Ann Boon wrote:

>
>> Asterisk dies with unable to specify channel 1: No such device or 
>> address
>>
>> When I try ztfg -vv     I get:
>> Zaptel Configuration
>> ===============
>>
>> Channel map:
>> 0 channels configured.
>>
> Did you configure /etc/zaptel.conf? Digium cards must be configured at 
> 2 locations /etc/zaptel.conf and /etc/asterisk/zapata.conf. And make 
> sure your /etc/modules.conf have:
> post-install wctdm   /usr/sbin/ztcfg

yes, it is there.

; zaptel.conf

loadzone=tw
defaultzone=tw
fxols=1-2       ; FXS modules   (fxols -> FXS module)
fxsls=3-4       ; FXO modules   (fxsls -> FXO module)