[Asterisk-Users] getting TDM400P to work in a system that previously had Voicetronix card

[Ing. Germán González B.]

You have two choices:

1).- Remove the vpb drives from your system and compile again

2).- Edit /etc/asterisk/modules.conf and especify noload => vpbxxxx.so
(I don't remember the exact module name)

Regards

----------------------------------------------------------------------

 Germán González
 PoderNet León
 http://leon.podernet.com.mx

----------------------------------------------------------------------

On Sun, 28 Nov 2004, Rahul Iyer wrote:

> Hi All,
>
> I recently installed and compiled Asterisk in a Red Had (enterprise)
> box with digium
> TDM400P card installed in it. Thanks to the good documentation
> available, I was able to install and configure the hardware as well as
> software.
> As specified in the Getting Started with Asterisk Guide, I first
> installed zaptel driver, then libpri and finally Asterisk. All of them
> successfully compiled, but when I execute asterisk
>
> # asterisk -vvvvvc
>
> it doesnt start up, after printing plenty of debug messages it finally
> quits with giving the message
>
> Can't open file /dev/vpb0 or /dev/vpbph0
>
> These drivers were installed in the system for the voice tronix cards,
> which we trialled previously. They (voice tronix cards and driver) are
> no longer used. Even though we have compiled 'zaptel' commenting out
> 'ztdummy' we still get the error. We have tried to freshly compile all
> files, but somehow asterisk thinks voice tronix cards are installed.
>
> I have searched through archives to get some lead, but in vain.
> Any help on how to trouble shoot this problem will be greatly appreciated.
>
> Thanks for your time and attention
> -r
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>