[Asterisk-Users] Little off topic

[Eric Hall]

Here is what I was trying to do


Telco gives me a PRI It connects to my Asterisk via Wildcard T100P using
a 2nd Wildcard T100P I would like to connect with a X-Cable my HylaFax
server.
 My question is will a Wildcard T100P work in a Hylafax server?


 
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric
Wieling
Sent: Friday, November 19, 2004 9:28 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Little off topic

Martin List-Petersen wrote:
> Citat Eric Wieling <eric at fnords.org>:
> 
> 
>>Martin List-Petersen wrote:
>>
>>>You can't, the T100P is a unchannelized T1 card.
>>
>>This is 100% wrong.  The T100P supports Channelized Voice T-1 (aka 
>>CT1)
>>
>>If you want to use it with HylaFax you need either SpanDSP OR an 
>>analog port on Asterisk in addition to the T100P.
> 
> 
> Might be that i'm wrong on the unchannelized bit, but i don't see, 
> where the analog port will help you ?
> 
> The guy wants to do Hylafax directly on a T100P w/o Asterisk or 
> Asterisk as middleware, which i don't see working. SpanDSP on the 
> other side works well, but that is basically a softmodem emulation,
something Hylafax can't do.
> 
> I have not seen any applications for spandsp outside Asterisk, yet.

*nod*  I mist have missed the part about doing it all within Asterisk. I
think I wrote that message before my 2nd cup of coffee.

An analog port would allow you to plug a modem into the Asterisk box and
run Hylafax using that.

T-1-> Asterisk -> Analog -> Modem.

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users