AW: [Asterisk-Users] Voice in Asterisk with BRI ISDN Any properworking configurations yet?

[Pascal C. Kocher]

Hello Tim
 
I'm struggling to get a HFC card running in NT mode. It seems to work
for a short period but then stops. The messages on the asterisk console
mentione something about event 6. 
 
Is the zaphfc module enough to be loaded or must hisax also be loaded in
order to work?
 
Best regards,
Pascal.


  _____  

	Von: Robinson Tim-W10277 [mailto:Tim.Robinson at motorola.com] 
	Gesendet: Donnerstag, 18. November 2004 15:00
	An: Asterisk Users Mailing List - Non-Commercial Discussion
	Betreff: RE: [Asterisk-Users] Voice in Asterisk with BRI ISDN
Any properworking configurations yet?
	
	
	I have 3 HFC cards running in my PC in both NT and TE mode.
Works well..  What problems are you having, what have you tried?
	 
	Rgds
	Tim

		-----Original Message-----
		From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Christiaan
Brink
		Sent: 18 November 2004 13:40
		To: 'Asterisk Users Mailing List - Non-Commercial
Discussion'
		Subject: [Asterisk-Users] Voice in Asterisk with BRI
ISDN Any proper working configurations yet?
		
		

		Hi all

		 

		If been working a while now trying to interface
Asterisks with BRI ISDN.  I've tried various drivers without any
success.  I'm running a HFC passive ISDN board in 2.6.5 kernel.

		 

		Is there anybody out there who have successfully
interface voice with Asterisk using BRI ISDN from their public operator?

		 

		If so, can you please supply me with details regarding
the type of card used, manufacturer, etc.

		 

		Also can you please provide me with details regarding
the drivers used and so forth.

		 

		Kind Regards,

		Christiaan Brink