[Asterisk-Users] mISDN & kernel 2.6.9

[Christiaan Brink]

I'm using kern 2.6.5-1.358

I'll try out chan_misdn.  Hopefully I'll have better luck with that.

Regards 
Christiaan



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Thomas
Jagoditsch
Sent: Thursday, November 18, 2004 2:12 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] mISDN & kernel 2.6.9

hi christiaan.

Christiaan Brink schrieb:

>I'm currently busy on a similar application with a hfc-card.  However, my
>needs is to interface the ISDN card in NE-mode with the operator.  If tried
>using Hisax but ran into a problem with the voice quality being bad in one
>directions.
>
>How did you manage to get chan_capi going for BRI ISDN hfc card.  Any
advice
>please!!!!!  Are the drivers built in? Or is it necessary to download them?
>Or are they included with chan_capi?
>
>It is likely that I will get the same errors as you are getting and then we
>can put our heads together in solving them
>

sorry, but i use chan_capi with the avm B1 card (this is an active one, 
different then a A1/fritzcard), see my posting.
i see no way to use a hfc-based card or an avm A1/fritz with chan_capi.
so IMHO you need not chan_capi but chan_misdn (or alternatively zaphfc - 
which despite trying hard i couldnt compile with the 2.6.9 kernel :-( )

maybe u could try chan_misdn (see the links in my previous post) for 
pstn. would be nice to know that mISDN works at least for TE-mode.
btw. which kernel do you use ?

wbr.tja...

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users