[Asterisk-Users] CAPI 0x3301 Problem

Sergio Serrano sergio.serrano at avanzada7.com
Thu Nov 18 02:01:23 MST 2004


Hi all,
	I have a PBX working for a year with an Eicon Diva Server 4BRI. One
day it was a storm and nothing occurs, but after a a few days I can't send
and receive any calls. I have connected TEIs to Asterisk and other PBX and
when I try to dial, I hear correct tone two times, but then line hangup,
with the next trace:

-- Executing
ChanIsAvail("SIP/824-b0cd","CAPI/971844367&CAPI/971846015&CAPI/971846034&CAP
I/971846036&CAPI/971846094&CAPI/971846141&CAPI/971846142&CAPI/971846143&CAPI
/971846146&CAPI/971846147&CAPI/971846148") in new stack
    -- data = 971844367
    -- capi request omsn = 971844367
  == found capi with omsn = 971844367
    -- CAPI Hangingup
    -- Executing Dial("SIP/824-b0cd", "CAPI/@971844367:687754642|17") in new
stack
    -- data = @971844367:687754642
    -- capi request omsn = @971844367
  == found capi with omsn = 971844367
  == CAPI Call CAPI[contr1/971844367]/1   == CAPI Call
CAPI[contr1/971844367]/1     -- creating pipe for PLCI=-1
       > sent CONNECT_REQ MN =0x7
    -- Called @971844367:687754642
    -- CONNECT_CONF ID=001 #0x0007 LEN=0014
  Controller/PLCI/NCCI            = 0x301
  Info                            = 0x0
  == received CONNECT_CONF PLCI = 0x301 INFO = 0
  == DISCONNECT_IND PLCI=0x301 REASON=0x3301
       > sent DISCONNECT_RESP PLCI=0x301
    -- CAPI Hangingup
    -- removed pipe for PLCI = 0x301


I obtain 0x3301 error message(Protocol error layer 1 (broken line or
B-channel removed by signalling protocol)). I'm in Spain. 

I think that problem could be something with:
	1) Eicon Diva Server is bad: I have tested this card in other
machine and other lines and it works well.
	2) MotherBoard is bad: this is a probable error but I'm not sure
because this motherboard has worked during a year.
	3) Wire from Card to TEI is broken, But I don't think this because I
obtain a valida MSN to put this call.
	4) Telecom Operator has modified something in these lines.

I start Eicon diva card with divactrl load -c 1 -f ETSI -u 2.

And my capi.conf is the next:

[general]
nationalprefix=0
internationalprefix=00
rxgain=0.5
txgain=0.5

[interfaces]
msn=971844367,971846015,971846034,971846036,971846094,971846141,971846142,97
1846143,971846146,971846147,971846148
isdnmode=multipoint
incomingmsn=*
mode=immediate
controller=1,2,3,4
;softdtmf=
;accountcode=
context=default
callgroup=1
;echosquelch=
echocancel=1
echotail=64
devices=8



Any idea?

Regards,
srsergio

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.796 / Virus Database: 540 - Release Date: 13/11/2004
 




More information about the asterisk-users mailing list