[Asterisk-Users] Best setup for BudgeTone

[Craig Guy]

I've been using 1.0.5.10 on 25 phones since August and I've only had to
reboot 2 phones the entire time.

Craig

----- Original Message ----- 
From: "Vahan Yerkanian" <vahan at arminco.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Monday, November 15, 2004 3:51 AM
Subject: Re: [Asterisk-Users] Best setup for BudgeTone


> Jean-Denis Girard wrote:
> > Well, 1.0.5.16 is the official version on the grandstream site:
> > http://www.grandstream.com/y-downloads.htm. I only installed it last
> > friday, so I'm not sure it is better or worse now.
> > I was using 1.0.5.11 before, and was not aware of the non-reregistering
> > problem, which would explain why the phone would not ring. Now using the
> > static IP the phone no longer need to register, so I may safely go back
> > to 1.0.5.11, right?
>
> Unfortunately that's not correct. Try this (with static IP):
>
> Set up the phone's re-register delay to a say 5 minutes. Save & Reboot.
> Call once. Phone rings. Wait 6 minutes. Call again. Phone doesn't ring
> and if you have something other than Dial() for that extension, say
> voicemail, it activates. My solution was to put a large value for the
> timeout, and reboot reboot reboot. This is true with 1.0.5.11, not sure
> about 1.0.5.16, as I rolled back from it as the message button wasn't
> working, sending only 'INVITE:' instead of the full SIP message to call
> the voicemail extension.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users