[Asterisk-Users] (newbie) no dialtone on a TDM400P card

[Thomas Andrews]

Hi Rich,

On Sun, Nov 14, 2004 at 04:27:44AM -0600, Rich Adamson wrote:

> 1. in the /usr/src/zaptel directory, do a 'make config'

Sorry, I didn't mention that I'm running debian, so that init.d script will
need tweaking. I'll look at it to see if it's doing anything that I'm
not.

> 2. execute a 'modprobe wctdm'

I already have the zaptel and wctdm modules loaded. I assume that's
enough ?

> 3. execute a 'ztcfg -vvv'

I posted the results to that in my first mail. But I'm assuming that
you're thinking that the init.d script may have changed something ?

> 3. execute 'service zaptel stop' followed by 'service zaptel start'

You must be running Red Hat. On debian that's "invoke-rc.d zaptel restart" ...

> 4. start asterisk
> Any difference?

The wierd thing is that after an arbitrary amount of time, asterisk
*does* start. I have linked this with the Power alarms. It won't start
before I get them, and it always does afterwards ????

Thanks for the help!
Thomas