[Asterisk-Users] spandsp problem

[Michael Welter]

Steve Underwood wrote:
> Hi Michael,
> 

> 
> What happens with 0.0.2pre4? For most people that version gives better 
> results than 0.0.1k. It seems to fix most of the quirks people have had.

It didn't work with the HP3150.  I have a new HP5510, and I'll try 
0.0.2pre4 again.

> 
> 
> spandsp says we have more pages to send. The remote fax machine sends a 
> disconnect message and hangs up. It sounds like the remote fax machine 
> is at fault. Does it always fail with one machine, and succeed with 
> another? Some machines can be set to receive a maximum of X pages. Could 
> it be soemthing like that.

You're absolutely correct. In a Hp->Sharp test (fax to fax) the Sharp 
disconnected after one page.  I'll focus my efforts on the HP machines.

> 
> Try to get 0.0.2 working. It works well enough for other people than it 
> is about to loose its "pre" status.

Ok, I'll do that.  To eliminate T-1 timing issues, I removed both the 
fax machines from the channel bank and put them on a TDM22B card.

Thanks for your help.


-- 
Michael Welter
Introspect Telephony Corp.
Denver, Colorado US
+1.303.674.2575
mike at introspect.com
www.introspect.com