[Asterisk-Users] ZT_CHANCONFIG failed on channel 1: No such device or address (6)

[Rob Emanuele]

Yes to power connecter being plugged in, PCI 2.2, and tried other slots.

I have tried the board in a brand new machine (that I can't use for
asterisk) and windows finds the card.


>> I bought a Wildcard TDM400P earlier this week.
>>
>> I compiled the software from CVS and installed it.  When ztcfg runs I
>> get
>> the error:
>>
>> ZT_CHANCONFIG failed on channel 1: No such device or address (6)
>>
>> After checking /proc/pci I don't see the board.  Why wouldn't the
>> board be
>> showing up?  Its in a slightly older machine (with an i440BX chipset)
>> that
>> any other PCI card I have works fine in.  My brand new desktop sees it.
>>
>> Any ideas?
>
> Have to ask the obvious: Is the power connector plugged in?  Actually,
> I think the card should show up even if it's not plugged in, though.
> Other questions: Is the motherboard PCI 2.2 compliant?  I don't think
> the TDM boards work with 2.1 or earlier.  Have you tried it in other
> PCI slots?  Do you have any other machines to test it in?
>