[Asterisk-Users] high-capacity systems / trouble with Tyan

[Tim Jackson]

>From my experience the Tyan Tiger MPX is a great board. I've never used
it with *, but I have been using it as a high volume samba server for
over a year and its never even hicupped. 

16:24:30 up 197 days, 20:45,  2 users,  load average: 0.94, 0.92, 0.89


-Tim

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of mattf
Sent: Wednesday, November 10, 2004 4:23 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] high-capacity systems / trouble with Tyan

Hello,

I've had a Tyan dual Athlon MP(2800) machine for a year now and have had
several lockups for strange reasons on stock redhat kernel and on custom
compiled kernel off of Slackware. I've tried every combination of BIOS
settings and changed out all assiciated hardware and found the problem:
It's
the Tyan. I've also had issues with a couple of SCSI RAID cards when I
tried
using them with the Tyan card.

This all would have really upset me if the Athlon MP platform performed
better than the Intel platform, but it doesn't. This Dual Athlon MP
system
actually handles LESS total Asterisk load than a single P4 3.2 GHz, and
the
P4 has a lot more Motherboard options and cost much less.

This is just my experience, I'm sure I am using Asterisk a little
differently than you, I don't have 3 Quad T1 cards in any of my
machines,
but if that's what you're looking for, I'd suggest the PowerPC(Mac)
platform. Asterisk installs just fine right on top of Yellow Dog Linux
and
the bus speed of a Mac mops the floor with most x86 motherboards,
meaning
more bandwidth for those bus-hungry Digium boards.

MATT---


-----Original Message-----
From: Jim Gottlieb [mailto:jimmy at nccom.com]
Sent: Wednesday, November 10, 2004 5:05 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Cc: chris at netgeeks.net
Subject: Re: [Asterisk-Users] high-capacity systems / trouble with Tyan


On 2004-10-29 at 20:49, Chris A. Icide (chris at netgeeks.net) wrote:

> The culprit is the RedHat kernel.  I don't know what redhat does with
their 
> kernel or sources.  But If you build your own kernel from non-redhat 
> source, asterisk will compile perfectly.

I did as instructed and recompiled a kernel from kernel.org and rebuilt
asterisk.

However, the problem remains.  I can run one or two cards with no
problem.  But once I enable the third card, the system locks up within
a few minutes.

I tried getting Athlon MP motherboards other than the Tyan S2466, but
no one has any anymore.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users